All Issue

2024 Vol.66, Issue 3 Preview Page
Exploration of Water Pumping Station Digital Twin System Development Process According to Software Development Methodologies

소프트웨어 개발 방법론에 따른 양배수장 디지털 트윈 시스템 개발과정 고찰

Byungjoon Leea
,
Nanyoung Kimb
,
Seongsoo Yoonc†
이 병준a
,
김 난영b
,
윤 성수c†
aPh.D. Student, Department of Agricultural and Rural Engineering, Chungbuk University, Cheongju, Republic of Korea
bPh.D. Student, Department of Agricultural and Rural Engineering, Chungbuk University, Cheongju, Republic of Korea
cProfessor, Department of Agricultural and Rural Engineering, Chungbuk University, Cheongju, Republic of Korea
a충북대학교 청주시 농업농촌공학과 박사과정 학생
b충북대학교 청주시 농업농촌공학과 박사과정 학생
c충북대학교 청주시 농업농촌공학과 교수
† Corresponding author Tel.: +82-43-261-2575, Fax: +82-43-271-5922 E-mail: yss@cbnu.ac.kr
2024. pp. 53-62
PDF XML Citation
Abstract

The purpose of this study is to examine the methodology for applying digital twin technology to pumping station, identify the factors to be determined at each stage, and present its applicability. When analyzing the requirements for developing a digital twin for pumping station, they were categorized into service requirements, IoT device requirements, and gateway requirements, with a total of 39 requirements established. In system design, it was structured according to the principles of modularity, abstraction, stepwise decomposition, and information hiding, allowing the implementation of planned items for diagnosis and operational management. There are difficulties in setting communication-related protocols and applying them in the field due to the complexity of overseeing the entire system with data. Therefore, it is necessary to clarify the purpose of the system, and there are challenges in identifying the characteristics of individual facilities, such as pumps in pumping station, and fully incorporating them into the system process. Thus, the framework of the initial design is crucial for implementing a digital twin.

Keywords
Digital twin
pumping station
IoT sensor
system development methodology
References

REFERENCES

1
A. A. A. Adenowo and B. A. Adenowo, International Journal of Scientific & Engineering Research, Software engineering methodologies: A review of the waterfall model and object-oriented approach, 4(7); 427-434 (2013)
2
Chung L., Nixon B. A., Yu E. and Mylopoulos J., Springer Science & Business Media, Non-functional requirements in software engineering (2012)
3
M. Grieves and J. Vickers, In Transdisciplinary Perspectives on Complex Systems, Digital twin: Mitigating unpredictable, undesirable emergent behavior in complex systems; 85-113 (2017)10.1007/978-3-319-38756-7_4
4
H. Hijazi, T. Khdour and A. Alarabeyyat, International Journal of Computer Application, A review of risk management in different software development methodologies, 45(7); 8-12 (2012)
5
J. S. Kim, Journal of the Korean Society of Agricultural Engineers, Transition of pumping technology, irrigation water requirement, and unit area drainage discharge at pumping station-based irrigation associations in South Korea during Japanese colonial period, 63(3); 59-73, (in Korean) (2021)
6
T. D. Kim, The Journal of The Institute of Internet, Broadcasting and Communication (IIBC), Software development project management using agile methodology, 16(1); 155-162, (in Korean) (2016)10.7236/jiibc.2016.16.1.155
7
S. G. Lee, Journal of the KIECS, Design and application of lora-based network protocol in IoT networks, 14(6); 1089-1096, (in Korean) (2019)
8
S. H. Lee, S. I. Park, T. H. Kwon and K. W. Seo, Journal of Computational Structural Engineering Institute of Korea, Civil infrastructure information modeling method based on extended IFC entities using BIM authoring software, 30(1); 77-86, (in Korean) (2017)10.7734/coseik.2017.30.1.77
9
Ministry of Agriculture, Food and Rural Affairs, Agricultural production base maintenance project plan design standards revision study, Korea. (2005)
10
Ministry of Land, Infrastructure and Transport, , https://www.molit.go.kr/. Korea (2023)
11
S. Park, J. Han, L. Choi and C. Jo, Korean Journal of Computational Design and Engineering, Application of BIM framework for digital twin implementation, 24(4); 361-372 (2019)10.7315/CDE.2019.361
12
W. Royce, IEEE WESCon, Managing the development of large software systems (1970)
13
Rural Agricultural Water Resource Information System, Status of agricultural production infrastructure, https://rawris.ekr.or.kr/ (2023)
14
Rural Research Institute, Development of evaluation model of agricultural infrastructure facilities using performance degradation factors, Korea. (2018)
15
F. Tao, F. Sui, A. Liu, Q. Qi, M. Zhang and B. Song, International Journal of Production Research, Digital twin-driven product design framework, 57; 3935-3953 (2017)
16
T. H. J. Uhlemann, C. Lehmann and R. Steinhilper, Procedia CIRP, The digital twin: Realizing the cyber-physical production system for industry 4.0, 61; 335-340 (2017)10.1016/j.procir.2016.11.152
17
E. Vanderhorn and S. Mahadevan, Decision Support System, Digital twin: Generalization, characterization, and implementation, 145 (2021)10.1016/j.dss.2021.113524
18
N. Wirth, Prentice-Hall in Automatic Computation, Systematic programming: An introduction (1973)
Information
  • Publisher :The Korean Society of Agricultural Engineers
  • Publisher(Ko) :한국농공학회
  • Journal Title :Journal of Korean Society of Agricultural Engineers
  • Journal Title(Ko) :한국농공학회논문집
  • Volume : 66
  • No :3
  • Pages :53-62
  • Received Date : 2024-04-15
  • Revised Date : 2024-05-03
  • Accepted Date : 2024-05-07
  • DOI :https://doi.org/10.5389/KSAE.2024.66.3.053
Journal Informaiton Journal of Korean Society of Agricultural Engineers Journal of Korean Society of Agricultural Engineers
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crossref funder-registry
  • crosscheck
  • orcid
  • open access
Journal Informaiton Journal Informaiton - close