Evaluation of Early-age Properties of Controlled Low Strength Material Using Non-destructive Testing

Dong-Ju  Kim; Sang-Cheol  Kim; WooJin  Han; Jong-Sub  Lee; Yong-Hoon  Byun

doi:10.5389/KSAE.2020.62.2.031

All Issue

2020 Vol.62, Issue 2 Preview Page Next Page

Evaluation of Early-age Properties of Controlled Low Strength Material Using Non-destructive Testing 비파괴 기법을 이용한 유동성 채움재의 초기경화특성 평가

2020. pp. 31-38

PDF XML

Abstract

Controlled Low Strength Material (CLSM) has high fluidity and self-compaction characteristics. CLSM is mainly used for backfilling the excavated road. Early-age properties of CLSM should be characterized for fast restoration of the road. In this study, shear wave monitoring and Vicat needle test are performed to investigate the early-age properties of CLSM depending on the setting time. CLSM consists of CSA cement, fly ash, silt and sand, accelerator, and water. Five fly ashes with different chemical properties are used for CLSM samples. The penetration of CLSM along setting time is obtained through the Vicat needle test. A pair of bender elements are placed in a mold for shear wave measurement, and the change in shear waves with the setting time is monitored. The experimental results show that, regardless of the type of fly ash, the penetration depth decreases and the shear wave velocity increases with the setting time. Depending on the type of fly ash, initial and final times and shear wave velocity change. After testing, the correlation between penetration and shear wave velocity is obtained with high coefficient of determination. The shear wave measurement technique using the bender element can be used to identify early-age properties.

Keywords

CLSM

early-age property

penetration

shear wave

References

REFERENCES

American Concrete Institute Committee 229 (ACI Committee),, Controlled low-strength materials (CLSM). (1999)

American Society for Testing and Materials (ASTM),, Standard test methods for time of setting of hydraulic cement by Vicat needle, C191. (2006)

American Society for Testing and Materials (ASTM),, Standard test methods for time of setting of concrete mixtures by penetration resistance, C403. (2016)

American Society for Testing and Materials (ASTM),, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, C618. (1994)

American Society for Testing and Materials (ASTM),, Standard test methods for consistency of controlled low strength material (CLSM), D6103. (2017)

Y. H. Byun, W. J. Han, E. Tutumluer and J. S. Lee, Construction and Building MaterialsElastic wave characterization of controlled low- strength material using embedded pizoeletric transducers., 127(2016); 210-219 (2016)10.1016/j.conbuildmat.2016.09.113

S. H. Cheon, S. S. Jeong, D. S. Lee and D. H. Kim, Journal of The Korean Society of Civil Engineers , Mechanical characteristics of accelerated flowable backfill materials using surplus soil for underground power utilities., 26(3); 303-312, (in Korean). (2006)

C. Dumoulin, G. Karaiskos, J. Carette, S. Staquet and A. Deraemaeker, Smart Materials and StructuresMonitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers., 21(4) (2012)10.1088/0964-1726/21/4/047001

H. Gu, G. Song, H. Dhonde, Y. L. Mo and Yan. S, Smart Materials and StructuresConcrete early-age strength monitoring using embedded piezoelectric transducers., 15(6); 1837 (2006)10.1088/0964-1726/15/6/038

X. Gu, J. Yang, M. Huang and G. Gao, Soils and FoundationsBender element tests in dry and saturated sand: Signal interpretation and result comparison., 55(5); 951-962 (2015)10.1016/j.sandf.2015.09.002

W. J. Han, J. S. Lee, S. D. Cho, J. H. Kim and Y. H. Byun, Journal of The Korean Geo- Environmental Society , Study on correlation between compressive strength and compressional wave velocity for CLSM according to curing time., 16(11); 5-11, (in Korean). (2015)10.14481/jkges.2015.16.11.5

W. J. Han, J. S. Lee, Y. H. Byun, S. D. Cho and J. H. Kim, Journal of The Korean Geo-Environmental Society , Characteristics of shear waves in controlled low strength material with curing time., 17(3); 13-19, (in Korean). (2016)10.14481/jkges.2016.17.3.13

G. H. Hong, Y. S. Shin and I. Y. Chung, Journal of the Architectural Institute of Korea , A fundamental study on the development of compressive strength and E-modulus of concrete., 12(7); 229-235, (in Korean). (1996)

D. S. Kim and Y. W. Choo, Journal of Korea Geotechnical Society , Dynamic deformation characteristics of cohesionless soils in Korea using resonant column tests., 17(5); 115-128, (in Korean). (2001)

H. K. Lee, K. M. Lee, Y. H. Kim, H. Yim and D. B. Bae, Cement and Concrete ResearchUltrasonic in-situ monitoring of setting process of high-performance concrete., 34(4); 631-640 (2004)10.1016/j.cemconres.2003.10.012

J. S. Lee and C. Lee, Journal of Korea Geotechnical Society, Principles and considerations of bender element tests., 17(5); 47-57, (in Korean). (2006)

D. Y. Lee, D. M. Kim, Y. S. Ryu and J. G. Han, Journal of Korean Geosynthetics Society, Development and application of backfill material for reducing ground subsidence., 14(4); 147-158, (in Korean). (2015)10.12814/jkgss.2015.14.4.147

J. H. Park, K. H. Lee, J. Y. Jo and S. N. Kim, Journal of Korea Geotechnical Society, Deformation characteristics of underground pipe with in-situ soil CLSM., 20(3); 129-139, (in Korean). (2004)

H. W. Reinhardt and C. U. Grosse, Construction and Building Materials, 18(3); 145-154 (2003)10.1016/j.conbuildmat.2003.10.002

Y. S. Ryu, W. R. Chae, J. S. Koo and D. Y. Lee, Journal of Korean Geosynthetics Society, Development of rapid hardening backfill material for reducing ground subsidence., 14(3); 13-20, (in Korean). (2015)10.12814/jkgss.2015.14.3.013

C. M. Sayer and A. Dahlin, Advanced Cement Based MaterialsPropagation of ultrasound through hydrating cement pastes at early times., 1(1); 12-21 (1993)10.1016/1065-7355(93)90004-8

N. A. Soliman, K. H. Khayat, M. Karray and A. F. Omran, Cement and Concrete Composites Piezoelectric ring actuator technique to monitor early-age properties of cement-based materials., 63(2015); 84-95 (2015)10.1016/j.cemconcomp.2015.09.001

G. Song, H. Gu, Y. L. Mo, T. T. C. Hsu and H. Dhonde, Smart Materials and StructuresConcrete structural health monitoring using embedded piezoceramic transducers., 16(4); 959 (2007)10.1088/0964-1726/16/4/003

J. P. Won and Y. S. Lee, Journal of Korean Society of Agricultural Engineers , Compressive strength of CLSM containing bottom ash.; 142-146, (in Korean). (2001)

J. Zhu, S. H. Kee, D. Han and Y. T. Tasi, Cement and Concrete ResearchEffects of air voids on ultrasonic wave propagation in early age cement pastes., 41(8); 872-881 (2011)10.1016/j.cemconres.2011.04.005

Information

Publisher :The Korean Society of Agricultural Engineers
Publisher(Ko) :한국농공학회
Journal Title :Journal of Korean Society of Agricultural Engineers
Journal Title(Ko) :한국농공학회논문집
Volume : 62
No :2
Pages :31-38
Received Date : 2019-10-29
Revised Date : 2020-02-21
Accepted Date : 2020-02-21
DOI :https://doi.org/10.5389/KSAE.2020.62.2.031

Journal of Korean Society of Agricultural Engineers ISSN:1738-3692(Print) 2093-7709(Online) 한국농공학회논문집

All Issue

REFERENCES